Azimuth Drives Screen

Azimuth Drives Screen - Status

This screen shows the statuses and values of the azimuth motors and enables their control.

Figure 2‑28. Azimuth drives - status screen.

ITEM	DESCRIPTION
1	Shows the status of the azimuth. There are three different statuses: “Idle”, in grey, means that the motor is off. “Fault”, in red, means that the motor has a fault. “Parked”, in grey, means that the motor is disabled and will not start up. “Enable”, in green, means that the motor is on.
2	Softkey “RESET ALL DRIVES”: Resets all drives. Softkeys “1”, “2”, “3”, and “4”: Selects the desired drives. Softkey “ON”: Starts up the previously selected drive. Softkey “OFF”: Parks the previously selected drive so that it is not enables when the axis is turned on, it will switch to the status “Parked”. Softkey “RESET DRIVE”: Resets the previously selected motor.

Azimuth Drives Screen - Values

This screen shows a graph with the real time azimuth drive current values.

Figure 2‑29. Azimuth drives screen - values.

ITEM	DESCRIPTION
1	Displays a graph with the real time values of the azimuth drives. Softkey “FREEZE GRAPH”: Freezes the graph. Softkey “UPDATE GRAPH”: Allows the graph to be updated after being frozen.