Elevation Drives Screen

Elevation Drives Screen - Status

This screen displays the statuses and values of the elevation motors and enables their control

Elevation drives screen - status

Figure 2‑18. Elevation drives screen - status.

ITEM

DESCRIPTION

1

Shows the status of the elevation motors. There are three different statuses:

  • “Disabled”, in grey, means that the motor is off.

  • “Parked”, in grey, means that the motor is disabled and will not start up.

  • “Fault”, in red, means that the motor has a fault.

  • “Enable”, in green, means that the motor is on.

2

Softkey “RESET ALL DRIVES”: resets all motors.

Softkeys “1”, “2”, “3”, “4”, “5” and “6”: select the corresponding motor.

Softkey “ON”: Starts up the previously selected drive.

Softkey “OFF”: Parks the previously selected motor so that it is not enables when the axis is turned on, it will switch to the status “Parked”.

Softkey “RESET DRIVE”: Resets the previously selected motor.

Elevation Drives Screen - Values

This screen shows a graph with the real time current values of the elevation motors.

Elevation drives screen - values

Figure 2‑19. Elevation drives screen - values.

ITEM

DESCRIPTION

1

Displays a graph with the real time values of the elevation motors.

Softkey “FREEZE GRAPH”: Freezes the graph.

Softkey “UPDATE GRAPH”: Allows the graph to be updated after being frozen.