Mirror Cover General View screen¶
Mirror Cover General View Screen – Main View¶
This screen displays the statuses of the “Mirror Cover” and enables control of their movements.
Figure 2‑45. Mirror cover general view screen - main view.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Displays the status and position (in deg) of the “Mirror Cover”. The box next to “run/alarm” lights up in the colour corresponding to the “Mirror Cover” status. Shows whether the “Mirror Covers” are retracted, deployed, locked or unlocked. The corresponding option lights up in green. The blue softkey navigates between the active interlocks, if there is more than one. When an interlock is active, the top box is displayed in red. If no interlocks are active, the box will be green and the blue softkey cannot be pressed. |
| 2 | Softkeys “Y+”, “X+”, “Y-” and “X-”: Selects the desired “Mirror Cover”. Softkey “ALL”: Selects all four “Mirror Covers” at the same time. |
| 3 | Softkey “ON”: Turns on the selected “Mirror Cover”, or all if “ALL” is selected, only if in “Idle” and no interlock is active. Softkey “OFF”: Turns off the system. Softkey “RESET ALARM”: Resets the system from its current alarm state or resets the interlock if one exists. |
| 4 | Only available when all axes are selected, softkey “ALL”. Softkey “DEPLOY”: Deploys all “Mirror Covers”. Softkey “RETRACT”: Retracts all “Mirror Covers”. |
| 5 | Adjusts the position (in deg) and speed (in deg/s) of the “Mirror Covers”. This is only possible if they are individually controlled. Softkeys “+” or “-”: Makes a movement at a constant speed in a positive or negative direction respectively. This sets the percentage of the default speed defined in the settings with the vertical slider. Softkey “MOVE”: Used to move the axes according to the previously entered specifications. Softkey “STOP”: Stop the movement of the axes. |
Mirror Cover General View Screen – Current Move¶
This screen shows a graph of the movement of the “Mirror Covers” in real time.
Figure 2‑46. Mirror cover general view screen - current move.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Displays a graph of the movement of the “Mirror Covers” in real time. Softkey “FREEZE GRAPH”: Freezes the graph. Softkey “UPDATE GRAPH”: Allows the graph to be updated after being frozen. |
Mirror Cover General View Screen – Move History¶
This screen displays and loads the last five movements of the “Mirror Covers” with number 1 being the last.
Figure 2‑47. Mirror cover general view screen - move history.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Softkey “LOAD”: Loads the last five movements. Once the desired movement has been selected, it allows it to be displayed on the graph. |